5000+ Great Articles

Your Windows 10 PC Did Not Start Correctly 2021

Your Windows 10 PC Did Not Start Correctly 2021.

It’s not so bad when Windows doesn’t boot on your computer on the first try. If this happens repeatedly, it could be a sign of trouble. The error “Your computer does not start correctly” on the screen indicates a problem with certain startup files and configurations.

This complication can be caused by a damaged file system, a power outage, a virus infection, or errors in the driver and software. You can easily fix the error and prevent it from happening again. Try the troubleshooting steps below and let us know where the error is going to be resolved.

Restart Your Computer

When Windows displays this error, the screen displays two options: Restart and Advanced Options. Some users reported that restarting their computers fixed the problem. Click the Restart button and wait for the computer to turn on again.

If Windows still won’t load at the login screen, try the following troubleshooting methods.

Boot into Safe Mode

Booting into Safe Mode can fix problems preventing your Windows PC from starting properly. When you get this error, shut down your computer, enter Safe Mode, boot your computer again and check if that solves the problem. Check out this detailed boot guide to Windows Safe Mode to see how it doesn’t work.

Run the Startup Repair Tool

Windows has a built-in tool to diagnose and fix problems that prevent the operating system from loading correctly. Startup Repair is located inside the Advanced Startup Options menu.

  1. Click Advanced Options on the blue screen with the error message.

An alternative way to boot your computer from the Advanced Options menu is through Settings> Update & Security> Recovery and clicking the Restart Now button in the Advanced Startup section.

On some Windows 10 devices, you can access the advanced options menu by pressing the F11 key multiple times as soon as you press the power button. Restarting your computer three times in a row is another way to force the automatic start options to be activated. Select “Troubleshoot” and then select “Advanced options” to continue.

  1. Select Startup Repair.

The tool will immediately diagnose your computer and fix issues that prevent Windows from booting properly. Startup Repair Tool will also check for errors on your computer’s drive and try to fix them. This can take a couple of minutes or hours, so make sure your computer is connected to a power source.

Run the System File Checker

Your computer may have difficulty starting Windows if there is a problem with some of the system files. Use the System File Checker tool to repair or reload missing and corrupted system files.

  1. Click Advanced Options on the error screen.

  1. Select the command line.

  1. Type or paste DISM.exe / Online / Cleanup-image / Restorehealth into terminal and press Enter.

The command will launch the Deployment Image Servicing and Management (DISM) tool to scan and download the necessary system files that are required to properly boot your computer.

  1. Then paste sfc / scannow in a terminal and press Enter.

This command scans your computer for missing or corrupted system files and replaces them with a stable copy downloaded with the DISM tool.

  1. Restart your computer after scanning is complete. Paste shutdown / r into a command prompt terminal and press Enter.

Perform System Restore

As mentioned earlier, installing a program with errors can mess up your PC’s boot files and configurations. If you notice this error right after installing the driver or application, use a restore point to return your computer to its previous state, in which everything was working fine.

Windows automatically creates restore points once a week when System Protection is enabled on your computer. Windows also makes these notes prior to critical system changes such as installing a driver or updating Windows. Follow these steps to perform a System Restore and fix this startup error.

  1. Select Advanced Options on the error page.
  2. Select “System Restore” and click “Next” to continue.

  1. If you have multiple administrator accounts on your PC, you may need to select the account you want to recover and enter the account password.
  2. Select the most recent restore point – make sure you check the Date and Time column. Or select a restore point that was created before installing the problematic application / driver and click Next.

  1. Optionally, click Scan for Affected Software to view the applications that System Restore will remove from your computer.
  2. Confirm your choice and click “Finish” to start the system restore operation.

Windows will take your computer back in time and hopefully fix the problem causing the “Your computer won’t start correctly” error.

Note. After a system restore, Windows retains your personal files, but removes applications, drivers, and updates installed after the restore point was created.

Uninstall or Delete Recent Updates

Did you notice this error after installing Windows Update? We recommend uninstalling updates from your computer.

  1. Open Settings> Update & Security> Windows Update and select View Update History.

  1. Select Uninstall Updates.

  1. Select an update and click Uninstall to continue. Make sure you check the Installed column to confirm the installation date of the problematic update.

Repair Windows Boot Configuration Data

Boot Configuration Data (BCD) is a collection of data used by Microsoft to boot your Windows computer. Your computer may not boot Windows if the files that make up the BCD are damaged or missing. Follow these steps to repair the BCD of your computer.

  1. Click Advanced Options on the error screen.

  1. Type or paste bootrec / fixmbr into terminal and press Enter. Proceed to the next step when you see the message “Operation completed successfully.” message.

  1. Type or paste bootrec / fixboot and press Enter.
  2. Type or paste bootrec / rebuildbcd and press Enter. These commands will scan your Windows installation and fix any problems it finds.

  1. If the command identifies any Windows installation, type Y or A and press Enter to add the installation to the boot list.
  2. Finally, paste shutdown / r into the Command Prompt Terminal and press Enter to restart your computer.

Reset Windows Master Boot Record (MBR)

The Master Boot Record (MBR) is a sector on your hard drive that points to your computer’s location for Windows. If the MBR gets damaged or corrupted, your computer will display messages such as “Operating system loading error”, “Invalid partition table”, “Computer did not start correctly”, etc.

Restoring the MBR to its factory configuration can fix this problem. Follow the instructions below to do this.

  1. Select additional options on the error page.
  2. Select Command Prompt.
  3. In the command line terminal, type or paste bootrec / fixmbr and press Enter.

This command diagnoses and repairs corruption-related problems found in the MBR sector.

This command will scan for bad sectors in the MBR and fix them accordingly.

Last Resort: Reset Your Computer

If Windows still won’t load properly despite your best troubleshooting efforts, try resetting your computer to factory defaults. Windows will reinstall the OS, uninstall third-party applications, and reset all system settings to their defaults. Use this Windows 10 factory reset guide to learn more about this last step.

    1. Then paste bootrec / fixBoot into terminal and press Enter.

    1. Finally, paste bootrec / rebuildbcd into the console and press Enter.
      The command above will restore the Boot Configuration Data (BCD) store – a group of important startup files.

  1. Your Windows 10 PC Did Not Start Correctly 2021

    Your Windows 10 PC Did Not Start Correctly 2021

windows 10 your pc did not start correctly 2021
your pc did not start correctly windows 8
your pc did not start correctly windows 10 reddit
error occurred your pc did not start correctly

How to Fix “Your Windows 10 PC Did Not Start Correctly” Error

your pc did not start correctly 2020
how to fix your pc couldn’t start properly windows 10
your pc couldn’t start properly windows 10 error code 0xc00

How to Create A Restore Point in Windows 10

Exit mobile version