How to fix Werfault.exe error on Windows 7/8/10

bilal 1983

6 months ago

How to fix Werfault.exe error on Windows 7/8/10.

Windows 10 has no shortage of cryptic bugs and seemingly random issues that pop up from time to time. This is probably why Microsoft has a special program whose task is to track system errors and report them.

Except that sometimes the same system fails! So what about the dreaded Werfault.exe error? We have some tips that might help.

What is Werfault.exe?

As mentioned above, Werfault.exe is part of the error reporting system in Windows 10, but its purpose is quite specific. It acts as an intermediary for the error-prone applications and the Microsoft operating system.

Werfault is the error reporting process that manages the logging and transmission of application errors. When he does his job, you will never know that he is there.

Werfault.exe May Not Cause the Error?

The name “Werfault” may be part of the error you see, but that doesn’t always mean that Werfault itself is at fault.

If the error only occurs when launching one specific application, the problem is most likely with that application and not with Werfault itself. Likewise, if the error appears every time you do something specific, it might be due to the action actually causing the error.

– /

If Werfault errors are random, intermittent, and not related to anything obvious, this is a symptom of a problem with the error reporting system. It’s also likely a Werfault issue if it occurs with every app you try to open.

Common Werfault Error Causes

So why is Werfault going wrong? The reasons are varied, but based on the individual reports and the various fixes that appear to be workable, there are several common streams:

Certain applications violate reporting.
File damage caused by a virus.
System file corruption due to software or hardware problems.
Incorrect system updates.
Incorrect installation / removal of the application.
Werfault.exe or WerMgr.exe has been removed.

Troubleshooting Werfault.exe Errors

The fixes suggested below are based on one of these reasons, or at least some related to them.

1. Restart your computer

Everyone should know this basic troubleshooting step. But if you haven’t tried this basic troubleshooting solution yet, restart your computer. In many cases, the problem will go away with a simple restart.

2. Run your anti-virus software

Viruses and other malicious programs are sometimes disguised, giving the executable process a name very similar to the legitimate program. Perhaps something like “Werfault_.exe” or “wefau1lt.exe”.

Werfault errors can also be caused by damage to certain system files, which can be the result of malware corruption. In any case, you should run a virus scan just in case.

3. Use the System File Checker

Windows 10 has a handy utility that can quickly scan your Windows installation for corruption and replace those files with fresh, undamaged copies. To start a scan, do the following:

Right-click the Start button.
Select Windows Powershell (Admin).
Type sfc / scannow and press Enter.

Wait for the process to finish.

If the tool finds any errors, it will inform you about it, otherwise the process will exit without integrity errors.

4. Scan the disk for errors

If you are using a solid state drive from a reputable brand, it is unlikely that it will experience read errors. However, mechanical drives and low-quality solid state drives are prone to such problems. This can lead to file corruption and other data integrity issues. Running the Windows Disk Checker is a quick way to spot this problem:

Open Windows Explorer.
Right-click the drive you want to check.
Select Properties.

Select the Tools tab.
In the Error Checking section, select Check.

Select “Scan Disk”.

If the tool finds any errors, it will inform you and give you the opportunity to try to fix it. If your drive has serious mechanical or physical problems, you will have to replace it sooner rather than later.

4. Check your RAM

Computers are not very tolerant of errors that occur with data stored in your RAM. If even one bit is out of place, it can destroy applications or even the entire operating system.

While memory violations that lead to application crashes can be the result of a bug in the application code, it can also be due to faulty memory.

Identifying faulty RAM can be incredibly difficult, but Windows 10 has a built-in diagnostic tool that you can use:

Open the Start menu.
Enter Windows Memory Diagnostics.

Start the application.

Select Restart Now and check for problems.

Be sure to close all open applications and save your work before restarting your system. If the memory diagnostic tool finds a problem with your memory, you need to replace this module.

In rare cases, the source of memory errors can be the motherboard itself or the memory controller. However, the memory module is almost always to blame.

5. Temporarily disable error reporting

If you just want to mute the Werfault.exe error, just for a little while, you have the option to turn off Windows error reporting:

Right-click the Start button.
Select Windows PowerShell (administrator).
Type services.msc and press Enter.
Right-click Windows Error Reporting Service.
Select Properties.

Under Startup Type, select Disabled.

While errors in applications will of course occur, Werfault itself no longer boots. Thus, you should not see any Werfault.exe errors. Of course, this won’t fix the underlying problem, but until you find it, it’s the only way to just get your computer back up and running for a while.

6. Use system restore or check for updates

If your problems with Werfault started after something changed on your system, you might want to consider updating Windows and hardware drivers to the latest versions.

Alternatively, you can use System Restore (or any third-party backup you create) to roll back your system to a point where there was no problem. If the problem was caused by something that has changed on your system since the backup was taken, then with luck, the problem goes away.

Werfault Woes Begone!

Since werfault bugs cannot be so cryptic, getting rid of them can feel like trying to accidentally fix them. Hoping that one of them will take root. In truth, if you follow these general troubleshooting tips, you will most likely take care of what’s behind the problem.

For really unclear reasons for werfault errors, it’s worth submitting detailed information about your problems to Microsoft support or the specific developer of the application that might be causing the problem. It is also relatively painless these days to reset your Windows 10 installation. Just make sure you back up any irreplaceable data ahead of time.

Are you facing a werfault error that you just can’t fix? Write about it in the comments below, and perhaps a member of our reading community will find the answer you have been looking for.

–