How to Fix iPhone Black Screen Issues Easy Method.
When your iPhone won’t turn on or the screen suddenly goes black, the first thing you can think of is your valuable data and whether you can recover it. If the problem is serious enough, you might think that you need to replace your iPhone.
While black screen of death is a common problem, there are several troubleshooting steps you can take to fix iPhone black screen issues and bring your device back to life.
This guide explains the causes of iPhone black screen and fixes to help you get rid of it.
What Causes the iPhone Black Screen?
Some of the reasons your iPhone screen may go black include:
1. Charge the battery
How to Fix iPhone Black Screen Issues
As obvious as it may seem, it’s worth making sure your iPhone battery is not drained.
Most devices’ batteries start to drain over time, which means your iPhone may suddenly run out of battery even if you’ve recently charged it. In addition, there may be a rogue application that can drain the battery, so it is best to let it charge for about 15-30 minutes.
- Low battery;
- Unauthorized applications
- Bad or corrupted update
- Unstable firmware.
- Not enough space or space on your iPhone.
- Hardware problems caused by water damage or falls.
- Application or software crashes
- Lack of power can also be causing your iPhone screen to go black, but you should see a charging icon after a short amount of time.
If your iPhone does not respond to recharging, check to see if the charging cable or wall charger is damaged. If the original Lightning cable doesn’t work, you can try a third-party iPhone charging cable, but make sure it’s Apple MFi certified.
Alternatively, you can use wireless charging if your iPhone supports it (iPhone 8 or newer).
Check the charging point to make sure it is not dirty, as dust and grime can cause your iPhone to charge improperly. Check out our guide on why your iPhone won’t charge and six ways to fix the problem.
2. Force restart (hard reset) iPhone
If you’ve charged your iPhone’s battery and the screen is still black, there might be a software issue causing your iPhone to freeze or malfunction. A hard reset will usually resolve any software glitches that could cause the iPhone screen to go black or become unresponsive.
3. Update Apps
Sometimes, your iPhone screen may go black or freeze when using a certain app, especially if it is downloading something to your iPhone or downloading from the Internet.
In such cases, it is likely that the problem is with the application itself. But you can fix black screen issues by restarting your iPhone and updating the specific app that is causing the problem.
To update the app, go to the App Store> Updates tab and install any pending updates for the problematic app.
If the app freezes and your iPhone screen goes black when you try to download videos or other media, the problem might be a slow internet connection. However, the issue could also be due to throttling by the media delivery network or your ISP when you hit your bandwidth limit.
You can wait and see if the content downloads and if your iPhone returns to normal. Alternatively, you can switch to a faster internet connection and fix iPhone black screen issue when using video apps.
4. Factory reset your iPhone
Unlike a hard reset, which leaves all your data and settings intact, a factory reset erases everything and leaves your phone as clean and new as it was at the time of purchase.
If the first few solutions didn’t help fix iPhone black screen, it’s best to factory reset your device.
- To get started, connect your iPhone to your computer using the Lightning cable, open iTunes, wait for iTunes to recognize your iPhone, and then select the icon for your iPhone.
- Choose Browse> Restore iPhone.
- When prompted, back up your iPhone to keep all data until you delete it, then select “Restore” to confirm your action.
Wait for the iPhone to restart, after which you can restore it from a backup or leave it as a new iPhone and update it to the latest iOS version.
5. Put iPhone into DFU mode
If your iPhone’s screen is still black, won’t turn on or boot, you can put it into Device Firmware Update (DFU) mode and see if it works again. DFU mode allows you to turn on your iPhone and work around any major problems without starting the OS so you can change or reinstall the operating system.
- To do this, connect your iPhone to your computer. Press and hold the on/off button for about 10 seconds until the Apple logo appears, and then release the button while holding down the volume button.
- If your iPhone screen goes black. You are in DFU mode, but if you see the iTunes logo, you need to repeat these steps.
- Follow the instructions to complete the process. And then check if your iPhone screen returns to normal.
6. Reset your iPhone’s proximity sensor
When you bring iPhone up to your face, the screen dims and stays dark, even when the device is turned on and far from your face. This is due to the proximity sensor. But you can reset it and check if it is the reason your iPhone screen is black.
- To do this, force restart your iPhone and wait for it to restart. , and then tap Settings> General.
- Click Reset.
- Then click Reset All Settings.
Note. Clicking â€œReset All Settingsâ€ does not delete data. it just erases your settings and preferences.
Fix Black Screen Issues for Your iPhone
Remember to check your iPhone’s battery status. Keep your device charged. And install third-party apps from trusted sources to avoid screen freezes or crashes. It is also recommended that you check your iPhone with an antivirus to avoid error attacks and jailbreak your device, as this can compromise built-in security measures.
- If your device screen is blank or white, see our guide on iPhone white screen and how to fix it. We’ve also listed some of the troubleshooting steps to take when your iPhone’s touchscreen isn’t working.-
How to Fix iPhone Black Screen Issues Easy Method
How to Fix iPhone Black Screen Issues Easy Method.