How to fix If your iPhone, iPad, or iPod touch does not turn on.
Do you see a black screen when you try to turn on your iPad? Or does it seem to launch but instead get stuck on the Apple logo? Battery problems failed system How to put your iPhone or iPad into DFU mode, and hardware-level issues often become a problem when the iPad won’t turn on.
How to fix If your iPhone, iPad or iPod touch does not turn on
However, before you drop the towel and head to your local Genius Bar, it’s always a good idea to check out the troubleshooting tips below to see if you can fix your iPad yourself.
Force-Restart Your iPad
On rare occasions, your iPad may freeze while you turn it on. If you consistently see a completely black screen or Apple logo, force restarting your device might help it boot properly.
iPad with Home Button
Press and hold the Home and Top buttons at the same time until the iPad boots up and you see the Apple logo.
iPad that doesn’t have a Home button
Quickly press and release the volume up button and the volume down button one after the other. Then immediately press and hold the top button until you see the Apple logo.
If your iPad turns on without issue, it’s best to back it up immediately. If the problem persists, please adjust the settings or reset the settings to factory defaults.
If nothing happened, continue to fix the remaining errors.
Charge for at Least an Hour
While the last time you used your iPad it might feel like it had enough power, there are many reasons the battery runs out of power quickly and the iPad won’t turn on. If you see a black screen and nothing happens when you press the forced restart button combination, charge iPad for at least an hour before trying to turn it back on.
Replace Lightning Cable
Charging cables usually wear out after a couple of years (and in some cases even earlier) and may stop charging the iPad altogether. If you cannot turn on your iPad even after it has been connected to a power source for a long time, then this may very well be the case.
Check for signs of degradation and use a different Apple Lightning or USB-C cable. If you are using a third-party replacement, please make sure it is MFi certified.
How to fix If your iPhone, iPad or iPod touch does not turn on
Change Charging Adapter
Aside from the charging cable, don’t discount the fact that you might also be dealing with a faulty iPad charging adapter. If possible, try changing it. You can also use an iPhone charger (which will take longer, but still charge your iPad) or connect it to your Mac or PC.
Clean Charging Port
If your iPad still won’t charge, you should clean its Lightning or USB-C charging port. Sometimes lint and other debris can accumulate inside, clog contacts and interfere with charging the device.
Blowing out the charging port with a few short bursts of compressed air (avoid getting the nozzle inside the port) or carefully removing debris with a wooden or plastic toothpick should get rid of anything inside.
Try asking Siri Something
Your iPad may have turned on correctly, but there is something wrong with its display. Try calling Siri – press and hold the Home or Up button for a few seconds. Then ask her something.
If she answers, you are most likely dealing with a faulty display. However, it is still recommended to work on the rest of the fixes. This should help you back up your iPad as well as eliminate additional software-related issues.
Connect to iTunes/Finder
Connect iPad to Mac or PC via USB and check if it shows up in iTunes / Finder. If so, select it and (assuming you previously “trusted†the device) immediately create a local or iCloud backup.
Then select Check for Updates to install any new iPadOS updates. If that doesn’t work, select the Restore iPad option to perform a factory reset (you must turn off Find iPad before using Find iPad).
Enter Recovery Mode
If iTunes / Finder cannot detect your iPad, you must put it into recovery mode. You can then update or reset iPad settings, even if you don’t trust the device or have previously disabled Find iPad. Before you start, be sure to connect your iPad to your Mac or PC via USB.
iPad with Home Button
Press and hold the Home button and the top button until you see the Apple logo. Keep holding it until you enter recovery mode.
iPad that doesn’t have a Home button
Quickly press and release the volume up button and the volume down button one after the other. Then immediately hold the top button until you see the Apple logo. Hold it until you enter recovery mode.
After entering recovery mode, select the Update option to reinstall the system software without losing data. If that fails, use the Restore iPad option to restore your iPad to factory settings. For a complete step-by-step guide, check out this iPad Recovery Mode guide.
Enter DFU Mode
If your iPad fails to enter recovery mode, try putting it into DFU (device firmware update) mode. It is an advanced recovery environment that you can use to reinstall system software from scratch. Again, be sure to connect your iPad to your computer before getting started.
Note. Unlike recovery mode, your iPad screen will remain dark even after entering DFU mode.
iPad with Home Button
Press and hold the Home and Up buttons for 5 seconds. Then release the top button, but keep holding the Home button until you see the recovery mode screen in iTunes / Finder.
iPads that don’t have a Home button
Quickly press and release the volume up button and the volume down button one after the other. Then immediately press and hold the top button.
Once the screen turns black, hold down the Volume Down button (without releasing the side button) for 5 seconds.
Finally, release the side button, but keep pressing the Volume Down button until you see the Recovery Mode screen in iTunes / Finder.
In DFU mode, use the Restore iPad option to reset iPad settings. iTunes / Finder will download the latest system software to your Mac or PC and reset iPad settings. If you manage to turn on the iPad eventually, you can get your data back using a previous iCloud or iTunes / Finder backup.
Take It For Repairs
If none of the above fixes worked and your iPad still won’t turn on, you might be dealing with a badly discharged battery or faulty display. Various forms of physical damage (did you drop your iPad?) Or liquid damage can also prevent it from turning on. Your next course of action should be to invite an Apple Genius or Apple Certified Professional to take a closer look.
–
How to fix If your iPhone, iPad, or iPod touch does not turn on
How to fix If your iPhone, iPad, or iPod touch does not turn on