How to fix if Amazon Fire Tablet won’t turn on?.
In fact, this can happen for several reasons, from incorrectly pressing the power button to software problems.
In this article, we’ll go over the simplest and fastest solution to more complex tips on how to turn on and turn on your Amazon Fire tablet.
1. Hold Down the Power Button
In fact, you need to hold the button for at least 5 seconds. As soon as you do this, you will hear the boot sound and the Amazon Fire tablet will come to life.
Don’t be discouraged – this is the most common mistake users make when using their new Amazon Fire tablet for the first time.
2. Fully Charge the Tablet With the AC Adapter
If your Amazon Fire tablet is almost completely out of power, it may have entered Power Saving Mode or simply does not have enough power to boot properly.
Before trying anything else, plug the power adapter into a power outlet and plug the other end of the USB cable into a USB port on your tablet.
Hold the Power button for at least 20 seconds to make sure it is actually turned off and not just sleeping.
You can let your tablet charge for as little as an hour before trying to turn it on again. But if you want to be absolutely sure that it is fully charged, wait about four hours. Here’s how long it takes to fully charge a fully discharged Amazon Fire tablet battery.
As the battery charges, the light next to the power port should change from red to green when it is charged enough to boot the tablet. If the LED never turns green, then it is either not charging or you are using the wrong AC adapter (see Section 5).
Note. If you notice that your tablet won’t charge at all, or only partially charges, you may need to replace the battery (especially if you’ve had the tablet for some time).
You cannot get batteries directly from Amazon, but there are third-party sellers on Amazon from whom you can purchase batteries for Amazon Fire tablets. There are also many videos on YouTube that show you how to change them. Do not do this if your tablet is still under warranty. Instead, skip to section 6.
3. Update All Software
When you normally use your Amazon Fire tablet, it goes to sleep after a set number of minutes of inactivity. If there is an application running that prevents the Amazon Fire from waking up for any reason, it could mean that the Fire Tablet won’t turn on when it is actually just asleep
Why would an application do this? If any application on the tablet is out of date, it can cause unpredictable behavior like this. Therefore, it is advised to update all apps and see if that fixes the power-on problem.
To do this, press and hold the volume up and power buttons for 45 to 60 seconds. If the tablet was only in sleep mode, it should turn on.
Release the Power button and continue to hold the Volume Up button until the â€œInstalling the latest softwareâ€ message appears on the screen.
Once you see the installation complete message, skip to the next section to perform a soft reset to reinitialize your tablet and start using it again.
4. Perform a â€œSoftâ€ Reset
One little-known way to get a seemingly dead Amazon Fire tablet to work again is to soft reset the tablet.
What does it mean?
A soft reset is not limited to putting the tablet into sleep mode, nor is a simple press of the power button once. It will turn off the tablet completely before rebooting. Even if you missed the app update in the previous section, a simple soft reset might fix your Amazon Fire tablet not turning on.
To perform a soft reset:
Press and hold the Volume Down and Power buttons at the same time for about 10 seconds.
If you see the recovery screen, it means that your tablet was not actually in sleep mode, but most likely it was already turned off.
In this case, you have several options.
- Cancel this and reboot the device.
- If you don’t have anything important saved on your tablet, select to perform a factory reset. Keep in mind that this will delete everything that was saved on the tablet and restore all settings to their defaults.
If you do decide to perform a factory reset, it may well completely solve the problem with which your Amazon Fire tablet won’t turn on. So you have to think about it.
5. Use the Right AC Adapter
Also, if you find that your tablet won’t charge, or your Amazon Fire tablet won’t turn on even after four hours, you might be using the wrong AC adapter.
AC adapters for tablets and smartphones look pretty much the same, so it’s very easy to accidentally swap them. If you try to use a different AC adapter than the one that came with the Amazon Fire, it may not charge at all.
Make sure you are using the original charger that came with your tablet. It should have the Amazon logo printed on the side.
This AC adapter is rated for 5W and 1Amp. Thus, any other charger with a different rating will simply not work, or the charging time will take significantly longer.
If you are using the correct AC adapter but it still won’t charge:
- Make sure the micro-USB cable is not broken or damaged.
- Inspect each end of the cable to make sure the ends are not broken or damaged.
- Look inside the end of the USB cable to make sure any internal pins are not damaged or missing.
- Look inside the USB port of the AC adapter and check for bent or damaged pins.
If there is any damage, or even if everything is ok but the cable still does not charge the tablet, you may need to purchase a new AC adapter and micro-USB cable.
6. Reach Out to Amazon
If you’ve tried everything in this article and your tablet is new enough and still covered by the manufacturer’s warranty, you should contact Amazon Customer Service for assistance.
You can get your tablet repaired or even completely replaced for free.
How to fix it if Amazon Fire Tablet won’t turn on?
How to fix it if Amazon Fire Tablet won’t turn on?