How to Find Your Raspberry Pi’s IP Address?.
Every device on the network has an Internet Protocol or IP address. An IP address is how you identify a particular device on your network from everyone else, just like a street or postal address. If you want to connect to a device on your network, you need to know its IP address, and sometimes it can be difficult to find.
This article shows you how to find the IP address of a Raspberry Pi connected to your network. In some cases, your Pi’s IP address may be dynamic. So it can change. If your Raspberry Pi’s IP address has changed, you need a way to find out its new IP address. Since you may or may not have a display connected to your Pi, we’ll go over several ways to find the IP address of your Pi with and without a display.
Finding Your Raspberry Piâ€™s IP Address with a Monitor and Keyboard Connected to the Pi
The easiest way to find out the IP address of your Pi is to log into the Pi directly, regardless of whether you have an OS that includes a desktop with a graphical user interface.
If you have a standalone version installed (no Linux desktop)
If the operating system installed on your Pi doesn’t include a desktop with a graphical user interface, you can use a terminal window to find your Raspberry Pi’s IP address.
- Log into your Pi.
- Type ip a and press Enter.
- The IP address will appear in the following form: inet 192.168.xx
- In the above example, the Raspberry Pi is connected to the network via Ethernet, so the IP address appears in the eth0 section … If it was connected via Wi-Fi, the IP address would show up in the wlan0 section.
1- If you have a Linux desktop.
If your Pi has a Raspberry Pi OS with a desktop, you can easily find your Pi’s IP address by hovering over the network icon (two arrows) in the upper right corner next to the clock. An information panel will appear showing your Raspberry Pi’s network connections.
If your Pi is connected to the network via Ethernet, you will see your Raspberry Pi’s IP address after eth0. In the image above, the IP address is 192.168.1.179. Ignore the slash and numbers after it. (This tells you the mask.) If your Pi is connected to your network via Wi-Fi, you will see your Pi’s address after wlan0.
How to Find Your Piâ€™s IP Address from a Windows Computer on the Same Network
Use the hostname command
- On a Windows machine that is on the same network as your Pi, launch Command Prompt by typing cmd in the search box and pressing Enter.
- In the Command Prompt window, enter nslookup raspberrypi.
- As seen above, the nslookup command returned two results. The first is the gateway address (the address of your router) and the second is the IP address of your Raspberry Pi.
- Note. If the command returns â€œ*** [NAME_OF_YOUR_NETWORK] cannot find raspberrypi: non-existent domainâ€, it means that either the Pi is not on the same network, or there was a typo in the command, or your computer does not have access to query the DNS server.
Use the Ping command
Most network devices have ping enabled, and the vast majority of Raspberry Pi OS images have ping enabled by default. However, it is possible that ping commands have been disabled on your Pi, so this method of determining your Pi’s IP address is not guaranteed to work.
Using the ping command is similar to playing Marco Polo. You shout “Marco” and your network device responds with “Polo” with its location.
- On a Windows machine that is on the same network as your Pi, launch a command prompt by typing cmd in the search box and hitting Enter.
- In the Command Prompt window, type ping raspberrypi and press Enter.
- In the screenshot above, you can see that the IP address is displayed multiple times. If the ping command fails, the returned IP address may still be correct, so check if it works.
- Note. If the ping command cannot find the Raspberry Pi on your network, you will receive an error message that says â€œPing request could not find host raspberrypi. Please check the name and try again. “If this happens, try one of the following methods.
How to Find Your Piâ€™s IP Address with Third Party Tools
The network scanner tools scans every possible IP address on your network and tries to discover any available hosts like the Raspberry Pi. Remember that these tools will only work if your computer or phone is on the same network (i.e. connected to the same router) as the Raspberry Pi.
Use Angry IP Scanner
Angry IP Scanner is an open source program from Anton Keks that many Raspberry Pi users love. Your best bet is to download Angry IP Scanner from the GitHub page. This will ensure you get the latest version. This tool is available for Windows, Mac OS and Linux.
Install and run Angry IP Scanner on another computer on the same network as your Pi. The advantage of this method is that it detects all devices on your network. Look for the result with a hostname starting with raspberrypi. Warning: only run this tool if you have a network!
Use the Fing app on your smartphone
How to Find Your Raspberry Pi’s IP Address?
How to Find Your Raspberry Pi’s IP Address?