5000+ Great Articles

17 Things to fix if Wireless Mouse Not Working?

17 Things to fix if Wireless Mouse Not Working?.

Is your wireless mouse unable to connect to your Windows 10 computer? Does it turn off after a while? Or is the cursor behaving strangely? Hardware problems, misconfigured settings, and corrupted drivers are just a few of the many reasons that can prevent your wireless mouse from working properly.

17 Things to fix if Wireless Mouse Not Working?

Troubleshoot Keyboard and Mouse Not Working in Windows

If you want to fix your wireless mouse, then the following list of troubleshooting tips should help you.

again If you have a wireless mouse that won’t work and won’t connect, we recommend using a wired mouse or trackpad to navigate your computer while working on some of the fixes below. If this is not possible, the following keys may help you instead:

1. Replace/Recharge Battery

A dead battery can not only prevent the wireless mouse from connecting to your computer, but it can also cause sluggish or erratic cursor behavior. Try replacing it with a new battery. If your mouse uses a rechargeable battery, connect it to a power source for a while.

2. Turn On Power Switch

Almost all wireless mice have a power switch. You can usually find it at the bottom of the device. If your wireless mouse isn’t working, make sure it’s turned on.

3. Be Within Range

Most wireless mice only work a short distance from the USB receiver. Hence, make sure you are near the computer. If you are using a very old wireless mouse, it is also recommended that you remove any objects that prevent it from entering the receiver.

4. Remove and Plug Again

Sometimes, disconnecting and reconnecting the wireless receiver can help fix temporary glitches that prevent the wireless mouse from working properly. Try it.

5. Change USB Ports

Remove and reconnect the USB receiver to a different port on your computer. Ideally, you should avoid connecting it to any external USB hubs, instead, plug it into a port directly on your computer.

If that doesn’t work and your wireless mouse is still not working, try troubleshooting USB ports on your PC.

6. Restart Computer

Have you tried restarting your computer yet? This usually solves most problems. Open the Start menu (press the Windows key if the mouse is stuck), select Power, and select Restart to restart.

7. Remove Other USB Peripherals

In some cases, computer peripherals such as flash drives, scanners, and USB-connected printers can prevent the wireless mouse from working properly. Try to remove them.

If that helps, reconnect the USB peripherals one at a time to isolate the causing device.

8. Control Cursor Speed

If your wireless mouse is too slow or too fast, check that the speed settings are correct. Press Windows + S, enter mouse settings and select Open. Then use the slider under Cursor speed to increase or decrease the cursor speed.

9. Increase Cursor Precision

If you find it difficult to point at objects with a wireless mouse, try increasing the cursor accuracy.

1. Press Windows + S, enter mouse settings and select Open.

2. Select “Advanced Mouse Options” on the right side of the “Settings” panel.

3. Click the Pointer Options tab.

4. Select the Increase Pointer Precision check box.

5. Click “Apply” and “OK” to save the changes.

Certain Keys On Your Mac Not Working Properly?

10. Clean Optical Lens

If you are still having problems with the cursor on your wireless mouse, try cleaning the optical lens on the underside of your device. Compressed air or a damp cotton swab and isopropyl alcohol can be used to remove dust and dirt.

11. Increase Double-click Speed

Are you having trouble double-clicking on items? Increase the double-click speed on your computer and see if that helps.

1. Press Windows + S, enter mouse settings, and select Open.

2. Select Advanced Mouse Options.

3. Click the Buttons tab and use the slider under Double-Click Speed ​​to adjust the double-click speed.

12. Reinstall Mouse Driver

If you are still having wireless mouse connection problems or other wireless mouse problems, try reinstalling its drivers.

1. Press Windows + X and select Device Manager.

2. Expand Mice and Other Pointing Devices.

3. Right-click the HID-Compliant mouse (or the appropriate driver for your mouse) and select Uninstall Device.

4. Restart your computer. Windows 10 should automatically reinstall the driver on startup.

13. Update Driver/Install Support Software

By default, Windows 10 applies a generic driver to make the wireless mouse work on your computer. In almost all cases, this is more than enough.

However, if you are still having problems with your mouse, it is worth looking at the manufacturer’s website for specific drivers or support software. Install them and see if it helps.

14. Disable Fast Startup

Windows 10 comes with Fast Startup, which allows the operating system to start faster after a cold boot. However, it can also cause problems with wireless mice. Disable it and see if that helps.

1. Press Windows + X and select Power Options.

2. Select Advanced Power Options.

3. Select “Choose what the power buttons do”.

4. Select “Change settings that are currently unavailable.”

5. Uncheck Enable Fast Startup (Recommended).

6. Restart your computer.

15. Update Windows 10

The latest Windows 10 updates contain bug fixes that can fix various problems with your computer. It can also help when your wireless mouse isn’t working. If you haven’t updated your computer for a long time, do so now.

Press Windows + S, enter Windows updates, and select Open. Then click the Check for Updates button and install any pending updates.

Alternatively, select Optional Updates (if displayed) and install any listed hardware driver updates.

16. Uninstall Updates

On rare occasions, Windows 10 updates can do the exact opposite and break things. If your wireless mouse starts to malfunction after installing the update, try uninstalling it.

1. Press Windows + S, enter Windows updates and select “Open.”

2. Select “View update history”.

3. Select “Uninstall Updates”.

4. Right-click the most recent update and select Uninstall.

Did this fix the problem? In this case, you should postpone Windows updates until the next additional updates or updates hit the shelves.

17. Restore to an Earlier State

If none of the above fixes worked, you can restore Windows 10 to an earlier state where your wireless mouse worked without issue. If System Protection is enabled on your computer, you can use System Restore to do so.

1. Press Windows + S, enter System protection, and select Create a restore point.

2. Click the System Protection tab and select System Restore.

3. Go through the System Restore Wizard and restore your computer using the available system restore point.

Stay Wireless

Did the above fixes help resolve the issue? I hope they did it. Otherwise, you are probably dealing with a faulty wireless mouse. If it is still under warranty, send it in for a replacement.

17 Things to fix if Wireless Mouse Not Working?

17 Things to fix if Wireless Mouse Not Working?

2020 Lenovo Ideapad 3 15.6″ Touchscreen Laptop 10th Gen Intel Core i3 1005G1 12GB DDR4 RAM, 256GB PCIe SSD Almond Windows 10 Pro | 32GB Tela USB Card

wireless mouse stopped working
wireless mouse not working windows 10
hp wireless mouse not working
wireless mouse not working windows 7
wireless mouse not working after changing batteries
apple wireless mouse not working
wireless mouse not working but keyboard is
trust wireless mouse not working
hp wireless mouse not working

Exit mobile version